I/O | Part Name : | 4 Channel Digital Input Module - Discrete Input, Frequency Input or Pulse Counter Input |
| Part Number : | VPE-6060 |
| Channels : | 4 |
| Mode (Programmable) : | On/Off, Frequency, Pulse Counter |
| Polarity (Programmable) : | Capture on Rising or Falling edge |
| Bias (Programmable) : | Pull UP or DOWN (NPN or PNP input) |
| Frequency Range (Max): | 0.1 Hz to 65 kHz (Default) |
| Pulse Counter Range (Max): | 32 bit counter before rollover, value resets to 0 when register is read |
| Input Voltage Range nominal : | Typically 24 VDC, Minimum 9 VDC, Maximum 32 VDC |
| Sample Rate : | Programmable - 512 ms Default |
Processor | Processor : | STM32 Series |
Field Connections | Utilized Backplane Terminal Qty : | 12 |
| Method : | Screw, Rising Cage Clamp |
| Torque : | 0.753 N-m (4.3 Lb-in) |
| Screw : | M3 |
| Voltage Rating : | 300 VAC |
| Current Rating : | 15 A |
| Withstanding Voltage : | 1.6 KV |
| Cross section solid conductor AWG min : | 28 |
| Cross section solid conductor AWG max : | 12 |
| Cross section stranded conductor AWG min : | 28 |
| Cross section stranded conductor AWG max : | 12 |
| Stripping Length : | 6-7 mm |
Physical | Length : | 86.36 mm |
| Width : | 76.96 mm |
| Height (Above backplane) : | 78.74 mm |
| Weight : | 38 g |
| Weight, Shipping (Qty. 1) : | 100 g |
Electrical | Input Voltage Range (WL-MIO BUS) : | 5 VDC |
| Current max : | 80 mA |
| Current typical : | 75 mA |
| Power max : | 400 mW |
| Power typical : | 375 mW |
| BUS to Logic Isolation (working) : | 1000 VDC |
| BUS to Logic Isolation (transient) : | 1000 VDC |
| Field to Logic Isolation (working) : | 1000 VDC when TB1 Jumpers removed |
| Field to Logic Isolation (transient) : | 1000 VDC when TB1 Jumpers removed |
Ambient | Operating Temperature : | -40 to +85 °C |
| Storage Temperature : | -40 to +85 °C |
| Operating Relative Humidity (non-condensing) : | 5 to +95 %RH |
| Storage Relative Humidity (non-condensing) : | 0 to +95 %RH |
Warranty | Limited Liability : | Product Replacement 1 Year |